With Custom Bartop Arcade Cabinet plans, you can build your own cabinet to play your favorite old-school video games on, as well as new releases such as Mario Kart 8 and Pokémon X/Y. Not only will you have an awesome gaming rig to impress your friends with, but building your own cabinet from scratch gives you complete control over its design and function; you’re not limited to the design of the pre-existing cabinets that you can buy at stores. Here’s how to build a bartop arcade cabinet from the ground up!
How to Choose the Right Bartop Arcade Kit?
There are a few things to consider when choosing the right bartop arcade kit for you. If you want to make your own Custom Bartop Arcade Cabinet, then you need to start with arcade cocktail table graphics, arcade graphics vinyl, and print the graphics on it. You can also choose an already-assembled kit that comes with a monitor and buttons for your convenience. Just be sure that whichever option you choose will work with the game(s) that you have in mind.
How to Design a Custom Bartop Arcade Cabinet?
A bartop arcade cabinet is an affordable way to enjoy all the classics with family and friends, without taking up a lot of space. There are many DIY tutorials on how to build your own custom arcade cabinet. You can also buy premade ones online or in stores like Target and Walmart. If you want to add graphics, it’s easy to order some online too! You can find vinyl decals that let you print graphics right onto the surface of your cabinet. And if you don’t have any graphics or just want something simple, stick-on overlays work well too! One thing to consider when shopping for custom arcade graphics is what type of material it should be made out of. Wood is typically more expensive, but you might prefer this look over plastic because the wood will age better over time. Plastic doesn’t crack as easily as wood, but won’t be as durable in the long run because plastic wears down more quickly than wood does.
How to Build an Affordable Bartop Arcade?
Building your own bartop arcade cabinet is an affordable and educational way to build a retro gaming console. The best part? You get to choose which games to play! Follow these steps on how to build your own Custom Bartop Arcade Cabinet:
1) Search for the graphics you want on an arcade cocktail table graphics website, or print your own using an online template. 2) Cut them out with scissors and use a piece of adhesive vinyl over top to create the desired design. 3) Spray paint the inside of your cabinet with chalkboard paint so that players can write their initials on it after they win a game. 4) Mount the graphics onto cardboard before you spray paint so that it is easier to place them in their correct spot once they are dry.
How to Install an Inside JAMMA Board?
If you’re looking to build your own Custom Bartop Arcade Cabinet, the first step is to install an inside JAMMA board. This can be done by unscrewing the control panel from the control panel and lifting it up until it comes off. The easiest way to do this is by placing a screwdriver in the bottom hole and lifting up on the top of the screwdriver until it pops up. Afterward, lift the board up and place it into the bracket underneath the control panel. Next, place two screws into each corner to hold it in place. Place the graphics overlay over the board and line up the holes in the overlay with those found on both sides of the board. Place all four bolts into their respective holes and tighten them down using an Allen wrench or Phillips-head screwdriver. Lastly, replace the cover that protects most of your new bar table’s innards by returning it to its original position, ensuring that all hooks are lined up with corresponding slots before finally flipping it over again so that everything is back in its rightful place.
How to Install an Outside JAMMA Board?
The first step is to ensure that you have an appropriate cabinet. This can be as simple as a cocktail table or as extravagant as a full-size arcade machine. The most important thing is to make sure the surface can accommodate the outside JAMMA board and provides room for the joysticks and buttons. You will also need to invest in some arcade graphics vinyl and print your graphics onto it with a vinyl plotter, or transfer them digitally with an inkjet printer. Print out your arcade graphics onto the white paper backing on the vinyl and carefully peel off each one when done. Use painter’s tape around all edges of the graphic to protect it from being pulled off during installation. Carefully place each one on top of the corresponding button on the cabinet. Once you are finished, secure them by using tape along all edges of where they meet with any other graphic or button edge.
Final Thoughts on DIY Bartop Arcades
Building a bartop arcade cabinet might sound like a daunting task, but it is actually surprisingly easy to make your own custom arcade cocktail table. With the right supplies and some time, you can build your own arcade cabinet using nothing more than an old box and some buttons. If you have questions about how to get started building your own Custom Bartop Arcade Cabinet, then be sure to read this blog post!
While DIY bartop arcades are relatively inexpensive to build, they can be a lot of fun to play. An arcade cocktail table like this would make a great gift for a kid who is interested in video games and wants to have his or her own game system at home. With just an old box and some buttons, you can create a fun gaming experience for friends and family that will provide hours of entertainment.
